Specifications:
LED color:Warm white
Chip: Epistar
IP: 20
Voltage: 10- 30 V
Lumen: 196LM
CRI:≧80
CCT: 2800-3200k
Switch: Touch & Dimmable switch
Switch: Touch dimmer switch, dimming range 15%-100%.
Surface Mount:Mounting screws included, no hole, no cutting, no damage to install surface
What’s in the Paper Barrel?
1* LED Reading Light
1*Bag of Stainless Steel Screws
1*Manual
What are the advantages of our dimming Book Bed light?
✔ 3W, 10-30V Voltage to save your electricity.
✔ Surface mount, only need screw fixing, no need to make hole.
✔ The nimble switch has a Blue Aperture,as the night light or reminder light.
✔ The life of LED lamp bead is more than 30,000 hours, under normal use condition.
✔ The Memory Function ensures you don’t have to reset it; set it once and the dimmer will remember it.
✔ Waterproof design ( but don't soak it in the water ) to fully protect circuit safety, prevent accidental leakage.
How to use to this indoor wall lamp?
❶Touch the switch lightly to start the blue cue light --- MOVE YOUR FINGERS
❷Touch AGAIN, the led is lighting --- MOVE YOUR FINGERS AGAIN
❸Then press the switch for a longer period to adjust the light intensity as desired, [Brightness will change with the length of holding time, from the more and more to the dark, move finger; then Hold it down, will become more and more brighter, RECURRENTLY.]
❹Touch AGAIN to turn-off the light.
When you make sure the brightness you usually use , JUST NEED: Touch - Remove - Touch, it automatically displays the brightness of the memory.