GenuineMarine 6mm Red Single Terminal Junction Block Stainless Steel Single Stud Without Cover
Commodity: Single Terminal
Material: Stainless Steel
Maximum Working Voltage: DC 48V
Maximum Amplifier Per Circuit: Determined by the connected wires
Total Size: 41.5 x 24 x 34.9mm/1.63" x 0.94" x 1.37" (L*W*H)
Stud Size(M6): 2 x 6mm (1/4")
Package Included: 1pcs x Red Terminal Block
▲ The bottom plate is insulated and will not leak when installed on a metal boat/car body.
Precautions for terminal installation:
1. If the two lugs are mounted on one terminal and the two are lugs of different materials, such as one copper and the other aluminum, the aluminum lug must be installed.
2. If the tabs of three different materials are mounted on one terminal, the order of the aluminum sheet, the copper sheet, the aluminum sheet, or the order of the copper sheet, the aluminum sheet and the copper sheet must be alternately installed; if four Different materials are alternated and paired, and the principle of back-to-back is installed.
3. When installing the lug, you must consider the direction of the incoming line, ensure that the mounting direction of the lug is the same as the direction of the incoming line, and install it in a back-to-back manner. If there are more than two incoming lines, the fan-shaped installation should be adopted.
1.The colors may have difference as the different display, please understand.
2.Please allow 1-2mm error due to manual measurement, please make sure you do not mind before you bid.
We Also Recommend
GenuineMarine 4 Point 100A Power Distribution Terminal Bus bar for Yacht Boat
GenuineMarine 4 Position 250A DC/AC Copper Bus Bar Terminal Block for Yacht Boat Ship
GenuineMarine 5 Terminal 300V 100A Bus Bar Kit - Heat Shrink Ring Terminals Included for Car Boat Marine Caravan RV